Philips FW754P37 - Manual (Page 23)

TUNER
Manual programming
1 Press TUNER
2 Press TUNER (BAND) to select the desired
waveband: FM or AM.
3 Press PROGRAM for less than one second.
PROGRAM flag, the frequency and preset station
number start flashing.
— The next available preset number will be displayed
for selection.
4 Press TUNING ◄◄ or ►► to tune to the desired
frequency.
• When all 40 presets are stored, no preset number is
shown.
— The message "PRuBR№1 rULL "will be
displayed.
• If you wish to store the radio station to another preset
number, press PRESET T or A to select the desired
preset number.
5 Press PROGRAM again.
-* PROGRAM flag will stop flashing, and the radio
station will be stored.
• Repeat the above procedure to store other preset radio
stations.
Notes:
- You can cancel the manual programming by pressing
STOP m.
- During programming, If no button is pressed within 20
seconds, the system will exit program mode
automatically.
Tuning to Preset Radio Stations___________
• Press PRESET T or A to select the desired preset
number.
-*■ The preset number, frequency and waveband
appear on the display.
TAPE
Loading a tape
Press STOP'OPEN
The tape deck door opens.
Load the tape with the open
side downward and the full
spool to the left.
Close the tape deck door.
Tape Playback
1 Press TAPE to select TAPE mode.
-*■ "TRRE" will be displayed.
2 Load the tape into the desired tape deck.
3 Press PLAY ► to start playback.
• To interrupt playback, press PAUSE.
• To resume playback, press PAUSE again.
4 Press STOP*OPEN to end playback.
Rewind/Fast Forward
At the stop mode
1 You can rewind or fast forward the tape by pressing
◄ ◄ or ► ► respectively.
The tape will stop automatically at the end of the
rewinding or fast forwarding.
2 Press STOP*OPEN to stop rewind or fast forward.
23