Install the hardware, Setup requirements, Using power adapter to supply power to the unit – Compex Systems WPE53G User Manual
Page 20
Page 14
Install the Hardware
Setup Requirements
• CAT5/5e Networking Cable.
• At least 1 computer installed with a web browser and a wired or
wireless network interface adapter.
• All network nodes installed with TCP/IP and properly configured
IP address parameters.
Using power adapter to supply power to
the unit
* Caution: LV model DC Jack input voltage range is 9-15VDC
HV model DC Jack input voltage range is 15-24VDC
*** DO NOT use power adapter from HV model on LV
model
S
S
t
t
e
e
p
p
1
1
:
:
Connect the external antenna to the SMA connector of the access point.