Rewinding / fast forwarding, General information on recording, Preparation for recording – Philips MC77 User Manual
Page 23: When recording is in progress, One touch recording, To stop recording, Tape operation/recordìng
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tape Operation/Recordìng
Rewinding / Fast forwarding
Stop playback, press « or i
The tape will stop automatically at the end of
rewinding or fast forwarding.
Press ■ to stop rewinding or fast forwarding.
Note:
— During rewinding or fast ibrwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
General information on
recording
For recording, use only tape of lEC type I
(normal tape).
The recording level is set automatically, regardless
of the position of the Volume. Incredible
Surround. BASS/TREBLE. and so forth.
The tape is secured at both ends
i
ii
OMO
with leader tape. At the
beginning and end of the tape,
nothing will be recorded for six
to seven seconds,
lb prevent accidental recording,
break out the tab on the left
shoulder of the tape side you
want to protect
If "CHECK THPE" is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
OD^O
fc-o Oc
IMPORTANT!
Recording is permissible ff copyright or
other rights of third parties are not
infringed upon.
Preparation for recording
1
Press TAPE to select tape mode.
2
Load a recordable tape into the tape deck.
3
Press M or M to select the recording tape side.
appears on the display for the reverse
side.
► appears on the display for the forward
side.
4
Press AUTO REV. on the remote control
repeatedly to select a recording mode.
a for recording on one side only.
!ZD for recording on both sides.
5
Prepare the source to be recorded.
CD 1«2»3 — load the disc(s).
TUNER — tune to the desired- radio station.
AUX — connect external equipment
When recording is in progress
msm starts flashing.
•
ft is not possible to change tape side.
•
It is not possible to listen to another source.
•
It is not possible to activate the timer function.
One touch recording
1
Press CD 1-2-3, TUNER or AUX to select the
source.
2
Start playback of the selected source.
3
Press • REC to start recording.
To stop recording
•
Press ■ on the system.
Note:
— One Touch Recording is not possible in TAPE
mode, ’SELECT SOURCE" is displayed.
23