Philips MC77 - Manual (Page 19)

Radio Reception
G)-© O“©
■.WJti.ryCL
O O
Tuning to radio stations
Press TUNER to select TUNER, mode.
"TUNER" is displayed. A few seconds later;
the current radio frequency will appear on the
display.
If an FM station is received in stereo. CO is
displayed.
Press TUNER again to select the desired
waveband : FM, MW or LW.
Press and hold « or ►> until the frequency
indication starts to change, then release.
The display will show "SEfiRCH" until a radio
station with sufficient signal strength is found.
Repeat step 3 if necessary until you find the
desired radio station.
To tune to a weak station, press or ►► briefly
and repeatedly until optimal reception found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
Plug and Play setting (refer to "Basic Functions -
Plug and Play").
OR
1 Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
• Press M or N to select the desired preset
number.
If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2 Press and hold PROG until "BUTO" is displayed.
PROGRAM starts flashing.
The system will automatically store the radio
stations with sufficient signal strength, starting
from all RDS stations and followed by FM, MW
and LW bands resp)ectively. Weak RDS stations
may be stored in later presets.
^ When all the available radio stations are
stoned or the memory for 40 presets are used,
the last preset radio station (or the first available
RDS station) will be played.
To stop storing the automatic preset
• Press PROG or ■ on the system.
Note:
— ¡fno preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
19