Philips MC77 - Manual (Page 13)

Basic Functions
Notes: ■
— When the power is turned on, the disc tray may
open and dose to inidaiise the system.
— If no stereo frequency is detected during Plug
and Play, *CHECK flNTEf’iNfl" is displayed.
— During Plug and Play, if no button is pressed
within IS seconds, the system will exit Plug and
Play mode automatically.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
lb activate the demonstration
In standby mode, press and hold
DEMO STOP on the system until "DEMO
ON" is displayed
The demonstration will begin.
lb deactivate the demonstration
Press and hold DEMO STOP on the system
until "DEMO OFF" is displayed.
The system will switch to standby mode.
Switching the system on
In standby/demonstration mode
Press STANDBY ON to switch on the last
selected source.
Press CD 1-20 (CD 123), TUNER TAPE,
AUX/CDR.
Press any one of the disc CD OPEN'CLOSE
(CDI^ / CD2^ / CD 3^) button.
The system will switch to CD mode.
Switching the system to standby
mode
In demonstration mode
Press and hold DEMO STOP on the system.
In any other source mode (except Eco
Power standby mode)
Press STANDBY ON.
^ The clock will appear on the display when the
system is in standby mode.
Switching the system to Eco
Power standby mode (< 0.4 Watt)
Press ECO POWER (or (¡) on the remote
control).
"ECO Ph.lR" is displayed, then the display
screen will go blank.
The low power ECO POWER LED will be
lighted.
Note:
— If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power standby or standby mode.
Power saving automatic standby
As a power-saving feature, the system will
automatically switch to standby mode if you do
not press any buttons within 30 minutes after a
disc or tape has stopped playing.
In Eco Power standby mode
Press ECO POWER to switch on the last
selected source.
Press CD 123, TUNER, TAPE or AUX/CDR
on the remote control.
13