beautypg.com

Troubleshooting – Philips FWC87037 User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Troubleshooting

RADIO RECEPTION

Radio reception is poor«

-

If the signal is too weak, adjust the antenna or

connect an external antenna for better reception.

-

Increase the distance between the Mini HiFi

System and yourTV orVCK

TAPE OPERATION/RECORDING

Recording or playback cannot be made.

-

Clean deck parts, see "Maintenance”.

-

Use only NORMAL (lEC 1) or lEC type II (CK)^)

tape.

-

Apply a piece of adhesive tape over the missing

tab space.

The tape deck door cannot open.

- Remove and reconnect the AC power plug and

switch on the system again.

GENERAL

The system does not react when buttons

are pressed.

~ Remove and reconnect the AC power plug and

switch on the system again.

Sound cannot be heard or is of poor

quality.

-* Adjust the volume.

-

Disconnect the headphones.

-

Check that the speakers are connected correctly.

~ Check if the stripped speaker wire is clamped.

The left and right sound outputs are
reversed.

- Check the speaker connections and location.

The remote control does not function

properly.

Select the source (CD orTUNER, for example)

before pressing the function button (►,

H).

Reduce the distance between the remote control

and the system.

Insert the batteries with their polarities

(+/- signs) aligned as indicated.

Replace the batteries.

Point the remote control in the direction of the

system's IR sensor.

The timer is not working.

~ Set the dock correctly,

-

Press TIMER ON/OFF to switch on the timet;

-

If recording is in progress, stop recording.

Not ali iighted buttons are showing iight.

- Press DIM to select DIM OFF display mode.

The Ciockrrimer setting is erased.

- Power has been interrupted or the power cord

has been disconnected Reset the dock/timer

The system displays features

automatically and buttons start flashing.

- Press and hold DEMO STOP ■ on the system

to switch off the demonstration.

29

This manual is related to the following products: