Philips FWC87037 - Manual (Page 14)

Basic Functions
Switching the system on
In Standby mode
• Press STANDBY ON or CD/TUNER/
TAPE/AUX on the system.
^ The system will switch to the last selected
source or the selected source.
• Press any one of the DISC DIRECT PLAY
buttons or OPEN'CLOSE.
The system will switch to CD mode.
In Eco Power Standby mode
• PressCD 123, TUNER, TAPE 1/2 or AUX/
COR on the remote control.
^ The system will switch to the selected source.
Switching the system to Standby
mode
In Demonstration mode
• Press and hold DEMO STOP ■ on the
system.
In Eco Power Standby mode
• Press ECO POWER.
In any other source mode
• Press STANDBY ON (or (¡) on the remote
control).
The clock will appear on the display when the
system is in Standby mode.
Switching the system to Eco
Power Standby mode
• Press ECO POWER (or press and hold (¡) on
the remote control).
-♦IDW PDIJER STRfJMy OWwillbe
displayed, then the display screen will go blank
The low power ECO POWER LED will be
lighted.
Note:
- If you hove not deactivated the demonstration, H
will resume five seconds after the system switches
to Eco Power Standby or Standby mode.
Power Saving Automatic Standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc or tape has stopped playing.
Dim mode
You can select the desired brightness for the
display.
Press DIM repeatedly to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
DIM appears on the display, except for DIM
OFF mode.
DIM OFF - normal brightness with
Spectrum Analyzer On
S i n O F F '
f.l ■
DiM 1 - normat brightness with Spectrum
Analyzer Off
DIM 2 * half brightness with Spectrum
Analyzer On
s»*'*' O / X I I l _ _______
DIM 3 - half brightness with Spectrum
Analyzer Off and all LBDs on the system
will be switched off*
14