To activate the demonstration, To deactivate the demonstration, Easy set – Philips FWC87037 User Manual
Page 13: Basic functions, Demonstration mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Basic Functions
IMPORTANTI
Befort you optrate the system, complete
the preparation ^»rocecfures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
О In Standby mode, press and hold
DEMO
STOP Ш
on the system until "SEfV OiJ" is
displayed.
-> The demonstration will begin.
To deactivate the demonstration
• Press and hold
DEMO STOP
■ on the system
until "ЛЕГИ ОГГ" is displayed.
The system will switch to Standby mode.
Notes:
- Even if you гетто the AC power cord and
reconnect it to the wall socket, the demonstration
will remain off until you activate it again.
- When the power is turned on, the disc tray may
open and close to initialize the system.
Easy Set
EASY SET allows you to store all available radio
stations automatically.
In Standby or Demonstration mode, press and
hold
STANDBY ON
until 5E f ” is
displayed.
The system will search for all radio stations
on the FM band, then the AM band.
All available radio stations with sufficient signal
strength will be stored automatically.
-♦ The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
The last preset radio station will play when
EASY SET is completed.
Note:
- When EASY SET is used, all previously stored
radio stations will be replaced.
13