General information on recording, Preparation for recording, Preparation for recording -24 – Philips FWC87037 User Manual
Page 23: 1 press-^orw, Tape operation/recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Tape Operation/Recording
To change the playback side on tape
deck 2 only
•
Press И or W.
The ◄ (BACK) or ► (FRONT) will appear
on the display, depending on the tape side
selected
To change the playback mode on tape
deck 2 only
•
Press
AUTO REVERSE
repeatedly to select
the different playback modes.
H : playback on one side of the tape only.
Ю : both sides are played once.
CO: both sides are played repeatedly, up
to 10 times each side unless you press Ш.
To rewind or fast forward during
playback
•
Press and hold •4^ or ►► until the desired
passage is reached, then release.
The tape continues playing.
•
The tape will stop automatically at the end of
the rewinding or fast forwarding
^ During searching, the sound is reduced to a
low volume,
lb rewind or fast forward when playback
is stopped
1 Press-^orW-.
2
Press
■
when you reached the desired passage.
Note:
- During rewinding or fast forwarding of a tope, it
is also possible to select another source (CD,
TUNER or AUK for example).
General Information on
Recording
' For recording, use only tape of lEC type I
(normal tape) or lEC type II (CrOj).
The recording level is set automatically,
regardless of the position of the Volume, VEC,
DSC and so forth.
The tape is secured at both ends with leader
tape. At the beginning and end
of the tape, nothing will be
recorded for six to seven
seconds.
To prevent accidental recording
break out the tab on the left
shoulder of the tape side you
want to protect
If “OC
l
K rRPC ” is displayed, the protection
tab has been broken. Put a piece of dear
adhesive tape over the opening. Do not cover
the CrOj tape detection hole when covering the
tab opening.
I
IMPORTANT!
-
Recording is pemissible if copyright or
other rights of third parties are not
Infringed upon.
-
Recording is possible only on tape deck
2.
Preparation for Recording
Press
TAPE
(TAPE 1 *2) to select TAPE 2.
Load a recordable tape into tape deck 2.
Press M or w to select the recording tape side,
appears on the display for the reverse
side.
^ ► appears on the display for the forward
side.
Press
AUTO REVERSE
repeatedly to select a
recording mode.
d for recording on one side only.
•4 for recording on both sides.
23