Philips FWC87037 - Manual (Page 18)

CD Operation
Disc Playback
To playback all discs on the disc tray
• Press PLAY ►!!
-> All the available discs will playback once, then
stop.
During playback, the selected disc tray, track
number and elapsed playing time of the current
track will appear on the display
To playback one disc only
• Press the DISC DIRECT PlAY button: DISC 1,
DISC 2 or DISC 3.
^ The selected disc will playback once, then
stop.
To interrupt playback
• Press PAUSE Pit
• To resume playback, press PLAY ►!! again.
To stop playback
• Press ■.
To search for a particular passage during
playback
• Press and hold or ►► and release it when
the desired passage is located.
During searching, the volume will be reduced.
To select a desired track
• Press M or H repeatedly (or Digits 0-9 on
the remote control) until the desired track
appears on ttie display
• If playback is stopped, press PLAY ► II to start
playback.
Note;
- In Shuffle mode, pressing H will couse the
player to skip only to the beginning of the current
track.
To skip to the beginning of the current
track during playback
• Press N once.
Replace discs during playback
1 Press DISC CHANGE.
2 To change the inner disc, press DISC
CHANGE again.
"II5C CHR i 'JGE” will be displayed and the
disc will stop playing
The disc tray will close to retrieve the inner
disc, then reopen with the inner disc accessible.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1 Load the desired discs on the disc tray (refer to
"Loading Discs").
2 Press PROG to start programming
raocRAM will start flashing
3 Press CD (CD 1 •2*3) or DISC 1/2/3 button
to select a disc.
4 Press M or H (or Di^ts 0-9 on the remote
control) to select the desired track
5 Press PROG to store the track
• Repeat steps 3-S to store other discs and
tracks.
6 Press PLAY ►!! to start program playback.
^ ’PL Fly PPOGPRiT will be displayed.
• To end programming without starting playback,
press ■ once.
The total number of tracks programmed and
the total playing time will appear on the display.
Notes;
- If the total playing time is more than "99'5 9"
or if one of the programmed tracks has a number
greater than 30, t h e n w i l l appear on the
display instead of the total playing time.
- If you ottempt to program more thon 40 tracks,
■PR0GPRÍ1 rULL" will be displayed.
- If you press any of the DISC DIRECT PLAY
buttons, the system will playback the selected disc
or track, and the stored program win be ignored
temparorily.The okockam symbol abo wW
disappear temporarily from the display. It wSI
reappear when pkiybock of the selected disc ends.
- During programming, if no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.
-4
18