Compaq HB1004 - Manual (Page 40)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-5
Compaq HB1004 10Base-T Ethernet Hub
Writer: Weldon W. Rowan Project: Troubleshooting Comments:
File Name:SAB_B.DOC Last Saved On:7/2/98 2:37 PM
Download
The Download option allows you to download software to the agent’s flash
ROM. The Diagnostic Mode Download operation and screen is the same as for
normal mode. See Chapter 3 “Downloading System Software” for information.
Factory Settings
This option allows you to reset all hub settings to the default factory
configuration. The Diagnostic Mode Factory Settings operation and screen is
the same as for normal mode.
Table B-3
Factory Default Settings
Description MIB Object Factory Setting
Contact Name sysContact Compaq Computer Corporation,
1-800-652-6672
Unit Name sysName/usUnitName Blank
Location sysLocation Blank
SNMP Access Traps snmpEnableAuthenTraps enabled
Port Enable Status rptrPortAdminStatus All Ports Enabled
Access Community String usCommunityString public in first entry
Access Mode usCommunityAccessMode All R/W
Community Status usCommunityStatus Only First Valid
Trap Receiver IP Address usTrapRcvrIPAddress All are set to 0.0.0.0
Trap Receiver Status usTrapRcvrStatus All Invalid
Download Server IP Address usDownloadServerIP Set to 0.0.0.0
Agent IP Address usAgentIP Set to 0.0.0.0
Agent Network Mask usAgentNetMask Set to 0.0.0.0
IP Gateway usAgentGateway Set to 0.0.0.0
Port Names usPortName All entries Blank