Compaq HB1004 - Manual (Page 12)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2 Installation
Writer: Weldon W. Rowan Project: Installation Comments:
File Name:SAB_2.DOC Last Saved On:7/2/98 8:49 AM
Mounting the Hub in a Rack
To mount the hub in a rack, follow these steps:
1. Use a standard EIA 19 inch rack
2. Use the brackets and screws supplied in the rack mounting kit
3. Use a cross-head screwdriver to attach the brackets to the side of the hub
Figure 2-1 Attaching the Mounting Brackets
4. Position the hub in the rack by lining up the holes in the brackets with
the appropriate holes on the rack, and then use the supplied screws to
mount the hub in the rack
Figure 2-2 Positioning the Hub in a Rack