Concord Camera 5330z - Manual (Page 129)

129
1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The setup mode menu is displayed on the LCD monitor as shown in the
figure.
3 3 Press the or key so that [YES] is highlighted and press
key to finish the setting.
• The camera settings are reset to the default.
• The LCD monitor display returns to the setup mode menu.
2 2 Press the or key so that [DEFAULT] is highlighted
and press the key.
• The display to confirm whether you reset the camera settings to the
default or not appears as shown in the figure.