Setting the date / time – Concord Camera 5330z User Manual
Page 121
121
SETTING THE DATE / TIME
When taking a picture, the date and time are recorded as the part of the image information. If the
built-in clock of this camera is not set correctly, the wrong date and time ate recorded. Set the date
and time correctly by performing the procedure below.
1
1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The power switch returns to the initial position.
• The setup mode menu is displayed on the LCD monitor as shown in the
figure.
2
2 Press the or key so that [DATE/TIME] is highlighted
and press the key.
• The display to set the date and time appears as shown in the figure.
3
3 Press the or key so that [DATE] is highlighted and
press the key.