Cisco CRS-1 - Manual (Page 44)

3-4
Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Site Planning Guide
OL-5802-09
Chapter 3 Technical and Environmental Specifications
Equipment Rack Specifications
Equipment Rack Specifications
Cisco Systems has tested the Cisco CRS 8-slot LCC to Cisco internal mechanical design verification
testing and electrical design verification testing in a four-post seismic rated (zone 4) rack. Use this
information for planning only. Consult your Cisco account representative for additional details.
If you plan to install the chassis in your own four-post rack, make sure that the rack meets the
specifications summarized in
Table 3-3 .
AC Input, single-phase
Input voltage Single-phase 200 to 240 VAC (nominal)
(range 180 to 264 VAC)
Line frequency 50 to 60 Hz (nominal)
(range 47 to 63 Hz)
Input current 16 A International
20 A North America
Table 3-2 8-Slot Line Card Chassis Component and Power Specifications—Modular
Configuration Power (continued)
Description Value
Table 3-3 8-Slot Line Card Chassis and Equipment Rack Specifications
8-Slot Line Card Chassis Specifications
Chassis Dimensions
Height 38.5 in. (97.8 cm)
Width 17.5 in. (44.5 cm)
18.9 in. (48.0 cm) mounting rail flange, outside to outside
Depth 36.6 in. (93.0 cm) without cosmetics
40.5 in. (102.9 cm) with full cosmetics
Chassis Weight
Chassis shipping weight 418.3 lb. (189.7 kg) chassis with shipping crate and pallet
330.8 lb. (138 kg) chassis with fans, PDUs, and blanks (as shipped)
Chassis with all cards and
power modules, no cosmetics 600 lb. (272.2 kg)
Chassis, fully loaded with line
cards and full cosmetics (front
cover, front grille, and so on) 650 lb. (294.8 kg)