Cabletron Systems 2E42-27 - Manual (Page 85)

SNMP Community Names Screen
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 5-33
To establish community names, proceed as follows:
1. Use the arrow keys to highlight the Community Name field adjacent
to the selected access level.
2. Enter the password in the field (maximum 31 characters).
3. Press ENTER.
4. Repeat steps 1 through 3 to modify the other community names.
5. Use the arrow keys to highlight SAVE at the bottom of the screen and
press ENTER. The message “SAVED OK” displays. The community
names are saved to memory and their access modes implemented.
NOTE
Exiting without saving causes a “NOT SAVED?” message to
display above the SAVE command. Edits will be lost if they are
not saved before exiting.