Cabletron Systems 2E42-27 - Manual (Page 154)

Appendix C: Optional Installations and Mode Switch Bank Settings
C-6 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide
• Switch 7 – Clear NVRAM. Changing the position of this switch resets
NVRAM on either the next power-up or the next operation of the front
panel RESET button. All user-entered parameters, such as the IP
address, device names, etc., are reset to the factory default settings.
Once the 2E4X-27 resets, you can either use the factory default
settings or re-enter your own parameters.
• Switch 8 – Reset Password/Community Strings. Changing the position
of this switch clears user-entered passwords stored in NVRAM, and
restores the factory default passwords on either the next power-up or
the next operation of the front panel RESET button. Once the 2E4X-27
resets, you can either use the factory default settings or re-enter your
own passwords.