Cabletron Systems 2E42-27 - Manual (Page 27)

2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 3-1
CHAPTER 3
INSTALLATION
This chapter provides all instructions required to install the 2E4X-27. A
Phillips screwdriver is required to install the device. Follow the order of
the sections listed below to correctly install the 2E4X-27.
• Unpacking the 2E4X-27 ( Section 3.1 )
• Installing Options ( Section 3.2 )
• Installing the 2E4X-27 (on a shelf or tabletop, or into a standard rack)
(
Section 3.3 )
• Connecting to the Network ( Section 3.4 )
• Completing the Installation ( Section 3.5 )
Only qualified personnel should install the 2E4X-27.