Cabletron Systems 2E42-27 - Manual (Page 47)

Using LANVIEW
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 4-3
RX
(Receive) Off No link. No activity.
Port enabled or
disabled. No error.
Green Solid. Port enabled,
link, no activity. No error.
Blinking. Port
disabled, link. No error.
Amber Flashing. Port
enabled, link, activity. No error.
Red Diagnostic failure. Contact the Cabletron
Systems Global Call Center
for help.
TX
(Transmit) Off Port enabled, no
activity.
Should flash green
every two seconds
indicating BPDUs
being sent if STA is
enabled and there is a
valid link. 1. Ensure that the STA is
enabled and that there is a
valid link.
2. Contact the Cabletron
Systems Global Call Center
for help.
Green Flashing. Indicates
activity. Rate indicates
data rate. No action.
Amber Blinking. Port in
standby.
Port may be disabled
due to Spanning Tree. 1. Ensure that the port is not
disabled.
2. Contact the Cabletron
Systems Global Call Center
for help.
Red Flashing. Indicates
collision rate. No action.
Solid. Diagnostic
failure. Contact the Cabletron
Systems Global Call Center
for help.
Table 4-1 LANVIEW LEDs (Continued)
LED Color State Recommended Action