Cabletron Systems 2E42-27 - Manual (Page 73)

General Configuration Screen
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 5-21
4. Use the arrow keys to highlight the SAVE command, then press
ENTER. The warning screen shown in
Figure 5-11 displays.
Figure 5-11 Configuration Warning Screen
5. Use the arrow keys to highlight the YES command, then press
ENTER. The changes are saved and the device reboots.
5.7.3 Setting the Default Gateway
If the SNMP management station is located on a different IP subnet than
the 2E4X-27, a default gateway must be specified. When an SNMP Trap
is generated, the 2E4X-27 sends the Trap to the default gateway. To set
the default gateway, perform the following steps:
1. Use the arrow keys to highlight the Default Gateway field.
2. Enter the IP address of the default gateway using the DDN format.
For example: 134.141.79.121
WARNING!
1960-84
YOU HAVE ELECTED TO SAVE ONE OR MORE CONFIGURATION
ITEMS THAT REQUIRE RESETTING THIS MODULE.
ARE YOU SURE YOU WANT TO CONTINUE?
YES NO
Event Message Line