Attaching the strain-relief bracket, Figure 3-2 attaching the strain-relief bracket, Strain-relief bracket screws (4) – Cabletron Systems 2E42-27 User Manual
Page 31: Reset
Installing the 2E4X-27
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide
3-5
Installation
Rack mounting the 2E4X-27 involves the following:
•
Attaching the strain-relief bracket
•
Rack mounting the 2E4X-27 (attaching the mounting brackets and
fastening the 2E4X-27 to the rack)
Attaching the Strain-Relief Bracket
Attach the strain-relief bracket to the front of the 2E4X-27 as follows:
1.
Locate the strain-relief bracket and four 8-32 x 3/8-inch pan-head
screws in the rackmount kit.
2.
Attach the strain-relief bracket to the bottom of the 2E4X-27 using the
four 8-32 x 3/8-inch pan-head screws (
).
Figure 3-2
Attaching the Strain-Relief Bracket
Do not attempt to attach the strain-relief bracket with screws
other than the 8-32 x 3/8-inch screws included with the
2E4X-27. Use of longer screws may damage the unit or cause
electrical shock.
Strain-Relief Bracket
Screws (4)
1960-47
1
2
3
4
5
6
7
8
11
12
13
14
15
16
9
10
17
18
19
20
21
22
23
24
COM
PWR
CPU
RESET
1X 3X 5X 7X 9X 11X 13X 15X 17X 19X 21X
23X
26
25
2E42-27