Enjoying dolby pro logic surround sound, Enjoying two-channel digital stereo sound, D hd – Philips DVD405AT98 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Warning
Do not set “AUDIO OUT SEL.” to “BITSTREAM” via the on-screen displays [29^ unless you are connecting (via the BITSTREAM/PCM AUDIO
OUT Jack) an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearing as well as the speakers.
Enjoying Dolby Pro Logic Surround Sound
Enjoying Two-channel Digital Stereo Sound
Dolby Pro Logic Surround
You can enjoy Dolby Pro Logic Surround sound by connecting an
amplifier and speaker system (right and left front speakers, a center
speaker, and one or two rear speakers).
■ With an amplifier equipped with Dolby Digital (AC-3),
Connect the equipment the same way as described in “Enjoying
Dolby Digital (AC-3) Sound” |i^. Refer to that amplifier’s owner’s
manual and set the amplifier so you can enjoy Dolby Pro Logic
Surround sound.
■ With an amplifier not equipped with Dolby Digital (AC-3),
Connect the equipment as follows.
^ --------------------------------------------------------------------------------------------:
To VIDEO OUT
I ^ Signal flow
Video cable
Connection
example
To ANALOG AUDIO OUT
Audio cable
To audio input
Amplifier equipped with
Dolby Pro Logic Surround
To video input of TV
Front speakeres;
(left)
Front speaker
(right)
Center speaker
Rear speaker
Connect one or two rear
speakers.
The output sound from the
rear speakers will be
monaural even if you
connect two rear speakers.
Set "AUDIO OUT SEL.” to “ANALOG” via the on
screen displays. ID (ID
1^ Notes I
Two-channel Digital Stereo
You can enjoy Two-channel Digital Stereo sound by connecting an
amplifier equipped with a digital audio input and speaker system
(right and left front speakers).
Set “AUDIO OUT SEL” to “PCM” via the
on-screen displays.
|D HD
• Connect the speakers according to the instructions in the owner’s manual for the speaker system.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wail outlet before making any
connections.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the
speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power on, the speakers may be damaged.
14