Connecting to a tv – Philips DVD405AT98 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connect the DVD video player to your TV.
Connections J For details of output sound, see
Connecting to a TV
Connecting to a TV
Setting of the sound output
From the on-screen displays, set “AUDIO OUT SEL.” to “ANALOG.” |£> (
31
)
To wall outlet
If your TV has an RF (Antenna In) jack only, use an RF modulator
(not supplied) to connect the DVD player to your TV.
• Set your TV to accept
Auxiliary (Line) input.
See your TV owner’s
manual for details.
Notes ^
' Refer to the owner’s manual of the connected TV as well.
' When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any
connections.
’ If your television set has one audio input jack, use a Y cable adapter (not supplied) to connect the DVD video player to your TV.
' Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TVA/CR combination, or video selector, the
playback picture may be distorted as DVD video discs are copy protected.
Connecting headphones
Connect headphones to the PHONES jack on the front panel i |
using a stereo plug. ^
. Push the knob out to turn.
Before connecting, temporariiy turn down the volume with
y
the LEVEL knob. Readjust to your preference when
Ó.—------------------ i'Ol’
playback begins.
=—= Down Up
11