OmniSistem PR Solo 1200 - Manual (Page 7)

SOLO 1200 EN.doc 7/18
FUNCTIONS DISPLAY
(CONTINUE)
SET ROTATION OF TILT (Default:OFF)
REVERSE ROTATION
FORWARD ROTATION
SET DMX CONTROL CHANNEL (Default
: ON)
DMX CONTROL CHANNEL ENABLED
DMX CONTROL CHANNEL DISABLED
DMX EXT. CHANNEL DISABLED
RESET (Default
: OFF)
FORWARD ROTATION
REVERSE ROTATION
SET ROTATION OF PAN (Default:OFF)
LINEAR ROTATION DISABLED
LINEAR ROTATION ENABLED
SET COLOUR FILTERS (Default
: STEP)
OPTION MENU
BY LAMP MENU
BY CONTROL CHANNEL
BY DMX SIGNAL EXISTING OR NOT
SET LAMP CONTROL MODE (Default:CTRL)
DMX EXT. CHANNEL ENABLED
SET DMX EXT. CHANNEL (Default
: ON)
CONFIG. MENU
RESET OR NOT
RESET MENU
ADDR. 001
SET ZOOM INVERT(Defaultaa:OFF)
ZOOM INVERT OFF
ZOOM INVERT ON
SET ADDR. (Default: 001)
SET PAN&TILT SWAP (Default:OFF)
PAN&TILT SWAP OFF
PAN&TILT SWAP ON
SET DIMMER INVERT(Defaultaa:OFF)
DIMMER INVERT OFF
DIMMER INVERT ON
LINEAR ROTATION DISABLED
LINEAR ROTATION ENABLED
SET GOBO POSITION (Default
: STEP)
SET IRES INVERT(Defaultaa:OFF)
IRES INVERT OFF
IRES INVERT ON
ENABLED AND LOAD ALL DEFAULTS
DISABLED