Accessories, Index introduction – OmniSistem PR Solo 1200 User Manual
Page 2
SOLO 1200 EN.doc
2/18
SAFE USAGE OF THE PROJECTOR
3
INSTALLING THE PROJECTOR
4
FITTING THE LAMP
4
POWER SUPPLY – MAINS
5
CONTROL CONNECTIONS
5
DMX TERMINATOR
6
SETUP OPTIONS-PROJECTOR CONFIGURATION
6
TO SET THE DMX START ADDRESS
6
FUNCTIONS DISPLAY
7
REPLACING GOBOS
9
CHANGING BELTS
9
DMX CONTROL CHANNEL FUNCTIONS
10
LED INDICATION
13
MAINTENANCE 14
LUBRICATION 14
KEEPING THE PROJECTOR CLEAN
14
TROUBLESHOOTING 14
TECHNICAL DATA
15
ELECTRICAL DIAGRAM
16
COMPONENT ORDER CODES
17
Please note that as part of our ongoing commitment to continuous product development, specifications are
subject to change without notice. Whilst every care is taken in the preparation of this manual we reserve the
right to change specifications in the course of product improvement. The publishers cannot be held responsible
for the accuracy of the information herein, or any consequence arising from them.
Every unit is tested completely and packed properly by the manufacturer. Please make sure the packing and / or
the unit are in good condition before installation and use. Should there be any damage caused by transportation,
consult your dealer and do not use the unit. Any damage caused by improper use will not be assumed by the
manufacturer and / or dealer.
THESE ITEMS ARE PACKED TOGETHER WITH THE PROJECTOR
G clamps (2 PCS)
XLR cable with 3-pin plug and socket (1 PCS)
Safety cords (2 PCS)
Spare gobos (3 PCS)
This manual (1 PCS)
Ω clamps (Options) (2PCS)
Thank you for purchasing our product SOLO 1200, PR-2902.
This product manual contains important information about the safe installation and use of this projector.
Please read and follow these instructions carefully and keep this manual in a safe place for future
reference.
SOLO 1200 is an innovative projector with an elegant housing, which is of Pan’s and Tilt’s locks for
maintenance and high quality fans free from noise. The projector has 2 types of clamps for mounting
at any direction and position. Which complies to CE norms and standards and uses international
protocol DMX 512.
The projector uses Philips MSR1200 SA/DE discharge lamp and high quality optical system, which
produces bright and beautiful light beam and. The projector features effects of strobe, frost light, mixed
colours and prism, so it is suitable for applications in TV station, discotheque, singing and dancing
stage, nightclub, etc.
ACCESSORIES
INDEX
INTRODUCTION