OFM MT42SQ User Manual
Multi-purpose table, Assembly instructions, Parts list

Holly Springs, NC, USA
800-520-7471 (voice)
919- 303-6389 (voice)
919-362-4765 (fax)
www.ofminc.com
Multi-Purpose Table
Model MT36RD 36" Round ▪ Model MT42RD 42" Round
Model MT36SQ 36" Square ▪ Model MT42SQ 42" Square
Assembly Instructions
Step 1: Attach plate (B) to center post (A) with 4 bolts (C). Set center post
(A) with mounting plate (B) on floor.
Step 2: Insert 4 leg supports (D) into center post (A) rims. Cover with center
post cap (E), insert and tighten 4 bolts (F).
Step 3: Screw on leveling glides (G) to leg supports (D).
Step 4: Place table top (H) on flat non-scratching surface. Invert base unit to
align with matching holes. Insert and tighten 4 bolts (I).
Step 5: Return to upright position and adjust leveling glides (G) if needed.
Step 1
Step 3
Step 4
H
I
G
B
C
A
Step 2
E
F
D
A
Parts List
1 - Center Post (A)
1 - Mounting Plate (B)
4 - 8m x 30mm Bolts (C)
4 - Leg Supports (D)
1 - Center Post Cap (E)
4 - 8m x 85mm Bolts (F)
4 - Leveling Glides (G)
1 - Table Top (H)
4 - 6m x 19mm Bolts (I)