OFM 565-L - Manual

I
Toothed Washers
4 Units
A
Chair Back
1 Unit
J
Flat Washer
4 Units
B
Chair Seat
1 Unit
C
Chair Base
1 Unit
D
Chair Arms
2 Units
E
8x25mm Screws
4 Units
F
8x30mm Screws
4 Units
G
Arm Screws
4 Units
H
Allen Wrench
1 Unit
K
Arm Caps
4 Units
Assembly Notes:
During assembly, hand tighten screw only when all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Model 565-L
Executive Leather Guest Chair
WEIGHT CAPACITY: 250 lbs.
Parts Listing
919-362-4765 (fax)
www.ofminc.com
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
[email protected]
06.11.2010
F
D
I
A
G
B
H
K
E
J
C
STOP
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
Please read all instructions before assembly.
Step 1: Attach mounting plate on Chair Back (A) to Chair Seat (B)
with 8x30mm Screws (F) and Toothed Washers (I), using
a screwdriver.
Step 2: Attach Chair Base (C) to Chair Seat (B) by inserting
8x25mm Screws (E) through Flat Washers (J) and through
cross bars on Chair Base (C) and then into Chair Seat (B).
Step 3: Attach Chair Arms (D) to Chair Back (A) and Chair Seat (B)
using Arm Screws (G) and Allen Wrench (H). Cover screw
holes with Arm Caps (K).
Step 4: Make sure all screws are secure and in place..