beautypg.com

OFM 700-AA6 User Manual

Big & tall chair, Assembly instructions

background image

Assembly Notes:

During assembly, hand tighten screws. Only when all screws

are in place, you may then tighten all screws completely.
CAUTION:

1. Do not use this chair as a step ladder.

2. Check for loose screws and tighten them every 6 months.

Model 700 / 700-AA6

Big & Tall Chair

WEIGHT CAPACITY: 400 lbs.

Parts Listing

919-362-4765 (fax)
www.ofminc.com

161 Tradition Trail, Holly Springs, NC, 27540
800-520-7471 (voice)
919-303-6389 (voice)
[email protected]

07.18.2013

E

Gas Lift

1 Unit

F

Telescopic Bellows

1 Unit

D

B

A

E

F

Seat

Mechanism

C

STOP

STOP

Assembly Instructions:

Tools Needed: Philips Head Screwdriver

Please read all instructions before assembly.

Step 1: Insert Gas Lift (E) into Chair Base (C).
Step 2: Cover Gas Lift (E) with Telescopic Bellows (F).
If you are assembling a model with optional AA-6 Arms please

proceed to subsequent pages for armrest assembly instructions.
Step 3:
Carefully place Chair Seat (B) with attached seat

mechanism onto the Gas Lift (E), aligning the hole

in the seat mechanism with Gas Lift. Press down

on Chair Seat (B) to secure onto Chair Base (C).

Step 4: Temporarily remove the screw from Chair Back (A) support

bar. Slide Chair Back (A) with attached back support bar

into the slot in the seat mechanism. After the hole in the

support bar passes the mechanism, reinsert the srew into

the support bar. This screw is used to prevent the

back from coming out of the mechanism when adjusting

the back height.

Step 5: Attach and hand tighten the Back Knob (D) on seat

mechanism until the Chair Back (A) is properly secured.

Step 6: Carefully sit on chair to make sure the Gas Lift (E)

is properly inserted into the Chair Base (C).

Step 7: Operate the gas lift lever on the seat mechanism,

to be sure unit is working properly.

A

Chair Back

1 Unit

B

Chair Seat

1 Unit

D

Back Knob

1 Unit

C

Chair Base

1 Unit

This manual is related to the following products: