Using the power kits (sold separately) – Canon A450 User Manual
Page 89
87
App
end
ix
Using Rechargeable Batteries
(Battery and Charger Kit CBK4-300)
This kit includes a battery charger and four rechargeable AA-size
NiMH (nickel metal hydride) batteries. Charge batteries as shown
below. Recharging is also possible using two batteries.
• After inserting the batteries, plug the charger (CB-5AH) into an
outlet, or attach the power cord to the charger (CB-5AHE, not
shown) and plug the other end into an outlet.
• Do not insert and charge additional batteries once charging has begun.
• The charge indicator blinks while charging, then remains lit when
charging is finished.
Using the Power Kits (Sold Separately)
z
The CB-5AH/CB-5AHE battery charger can only be used
to charge Canon AA-size NiMH batteries NB-3AH and NB-
2AH. Please do not attempt to charge other type of battery.
z
Do not mix batteries with different purchase dates or
different charge states. When recharging batteries, always
recharge both of them at the same time.
z
Do not attempt to recharge fully charged batteries, as doing so
may reduce or impair battery performance. Also, do not charge
batteries for more than 24 consecutive hours.
z
Do not recharge batteries in enclosed areas that tend to
retain heat.
z
Do not recharge the batteries until the LCD monitor
displays the “Change the batteries” message. Repeatedly
recharging batteries before they are depleted may cause
batteries to lose capacity.
Charge Indicator
To a power outlet
To a power outlet
4 batteries
2 batteries