Using the viewfinder, Power saving function, Using the viewfinder power saving function – Canon A450 User Manual
Page 19
17
Before Usin
g the Cam
era—Ba
sic Operatio
ns
The viewfinder (Basic Guide p. 2) can be used to conserve power
by turning the LCD monitor off
while shooting.
This camera is equipped with a power saving function. The power
will shut off in the following circumstances. Press the power button
again to restore power.
* This time can be changed.
Using the Viewfinder
Power Saving Function
Shooting Mode
Powers down approximately 3 minutes after
the last control is accessed on the camera.
The LCD monitor automatically turns off 1
minute* after the last control is accessed
even if [Auto Power Down] is set to [Off].
Press any button other than the power button
to turn the LCD monitor back on.
Playback Mode
Connected to a Printer
Powers down approximately 5 minutes after
the last control is accessed on the camera.
z
The power saving function will not activate during a slide
show or while the camera is connected to a computer.
z
The power saving function settings can be changed
.