NORAC UC5-BC-ECHO-VT - Manual (Page 40)

36
12 Software Update
This section applies to ECHO™ only. Software updates can also be performed through the Ag Leader
displays as well as the NORAC UC5 ToolSuite.
The UC5™ module software can be updated through Update screens. The latest version of
software can be downloaded from the NORAC web site (www.norac.ca).
Copy the update software onto an SD memory card or USB flash drive. Insert the card into
ECHO™ memory card slot or connect the flash drive to USB port using the included adapter.
Do not turn off the power while updating software. It may cause fatal damage to the modules or
display.
Navigate to the Settings screen (refer to
Section 8.1) and select UC5™ Update button.
Select a button to update either the modules or
the display.
12.1 UC5™ Modules Update
1. An update file name in the SD memory card
or USB flash drive will be displayed in the
Compatible Files window. Select the file
name.
2. Select Check button to start update.
1
2