NORAC UC5-BC-ECHO-VT - Manual (Page 25)

21
From the Setup screen, select Retune.
A list of precautions will be displayed on the
terminal. It is very important that you read
these precautions and follow them.
Once you have read the precautions, select the
Check button.
A list of connected modules will be displayed
(ECHO™ only). Make sure the modules match
your system modules.
If the list of modules matches the currently
installed modules, select the Check button.
You will then be instructed to hold the Check
button. The terminal will display “Cruising”.
The terminal will then instruct you to exit the
cab and pull the boom tip down towards the
ground and then release the boom.
Ensure you stay a minimum of 3 feet (1m) away
from any of the sensors.