NORAC UC5-BC-ECHO-VT - Manual (Page 24)

20
Hold the Check button and continue holding
it until you are instructed to release it.
The system will now calibrate the hydraulics.
All boom sections will move.
If you accidentally release the button, select
and hold the Check button to resume.
When the setup is finished the terminal will
instruct you to release the check to
complete the Automatic Setup.
Your NORAC UC5™ system is now
configured and ready for operation.
The Automatic Setup diagnostic screen is
reached by selecting Diagnostics button.
(ECHO™ only)
The automatic setup cannot be performed
with the diagnostic screen displayed.
8.3 Hydraulic Retune
On occasion it is necessary to recalibrate the NORAC UC5™ Height Control system. You
may want to perform a retune when:
 A hydraulic solenoid has been changed.
 A hydraulic pump has been changed or adjusted.
 A different tractor has been connected to the sprayer.
 The tractor’s hydraulic flow control has been adjusted.
* Some screens that appear in this manual may appear different, depending on the type of display you
have.