NORAC UC5-BC-ECHO-VT - Manual (Page 20)

16
8 Setup
Once the UC5™ Spray Height Control system has been installed, the UC5™ functionality must
be tested and the software must be tuned for the sprayer. There are two methods to setup
the UC5™ system. The recommended way is to use the Automatic System Setup as shown in
Section 8.2. The alternative method is to use Manual Setup, which is intended for expert
users and troubleshooting.
8.1 Navigating to the UC5™ Setup Menu
To perform either the Automatic or Manual System Setup, the user must navigate to the Setup
screen. The system must be in Manual Mode to perform setups.
When the system is in Manual Mode, select
the Settings button.
Select the Next button.
Select the Setup button.
The Setup screen will be displayed.