beautypg.com

NORAC UC5-BC-HG03 User Manual

Page 22

background image



19

9. Disconnect the Boom Up solenoid and insert the connector on cable (C11) that is

connected to output 5 on the valve module.

10. Disconnect the Boom Down solenoid and insert the connector on cable (C11) that is

connected to output 6 on the valve module.

11. Disconnect the Lock valve and insert the connectors on cable (C12).

12. 2-pin receptacles (P02) are provided to install onto the disconnected Hagie connectors.

Install these receptacles to keep the unused Hagie connectors from corroding.

13. Connect the temperature probe to the valve block using the supplied 3/8” x 1/2” hex bolt.

See also other documents in the category NORAC Gardening equipment: