NORAC UC5-BC-HD06 - Manual (Page 29)

26
Figure 25: HARDI DAH09 Connections
9. Configure the system for Autoslant by setting the DIP switches on DAH09 board:
 Set DIP switches 2, 3, 4, 6 and 8 to ON. Set DIP switch 5 and 7 to OFF (Figure 26).
 If the sprayer uses a DAH valve block set DIP switch 1 to OFF. If the sprayer uses a
DH valve block set DIP switch 1 to ON. See Figure 27.
Figure 26: Suggested Default Setting for DIP Switches 2-8 for AUTOSLANT
Figure 27: HARDI DAH (DIP 1 OFF) vs. DH Block (DIP 1 ON)
DB15
+12V
Ground
DIP
Switches