3 inverted roll sensor mounting, 4 temperature probe – NORAC UC4+BC+GV1 User Manual

Page 19

Text mode
Original mode

4.5.3 Inverted Roll Sensor Mounting
If desired, the Roll sensor may be mounted
inverted, so long as the connector exits
towards the right-hand boom. Inverted

mounting may be used to optimize the
mounting criteria as explained at the
beginning of Section 4.5.

Figure 17: Inverted Roll Sensor Mounting may be Applicable for Optimal

Performance

4.5.4 Temperature Probe
Fasten the temperature probe (E03) to the
UC4 valve block using the included 3/8x1/2”
bolt as illustrated in Figure 18.

Figure 18: UC4+ Valve Block with

Temperature Probe Installed