NORAC UC4+BC+CS5 - Manual (Page 20)

18
4.5.2 Reference Frame Roll Sensor
The reference frame roll sensor
should be the highest serial
number.
1. The reference frame (chassis) roll sensor
mounts directly beneath the top parallel
lift arm, as shown in Figure 19. The AMP
(circular) connector MUST exit
towards the right hand wing.
Figure 19: Reference Frame Roll Sensor Mounting Location
2. To mount the reference frame roll
sensor it may be necessary to modify the
roll sensor mounting bracket by cutting
the ends of the bracket off, as shown in
Figure 20.
3. Ensure the sensor is mounted adequately
and that the cable provides enough slack.
Figure 20: Roll Sensor Mount
Modification
Reference Frame
Roll sensor location