NORAC UC4+BC+CS5 - Manual (Page 17)

15
4.4
MAIN LIFT SENSOR INSTALLATION
1. Mount the bracket onto the lowest
frame member on the center section of
the sprayer. (Figure 13 and Figure
14).
Figure 12: Main Lift Sensor Bracket
Mounting
The General Mounting Rules for
Low Profile Brackets and the
General Mounting Rules for
UC4+ Ultrasonic Sensors, from
the previous section, must be
followed.
2. Mount the sensor into the bracket.
Figure 13: Main Lift Sensor Bracket
Mounting Position (Top View)
Figure 14: Main Lift Sensor Bracket
Mounting Position (Side View)