NORAC UC4.5-BC-RA1 - Manual (Page 10)

7
3.4 Hydraulic Fitting Kit Details (P/N: 44865-57)
Item Part Number Name Quantity Picture
F01 44928 ORIFICE INSERT .047 IN ONE WAY 4
F02 104369 PLUG - 6MBP 2
6 M B - 6 M OR X 90
SIZE IN
1/16 TH'S
GENDER: MALE
OR FEMALE
90 ° ANGLE
SWIVEL
TYPE
GENDER
SIZE
TYPE:
B - ORB
J - JIC
OR - FLAT
FACE
P - PIPE
Fitting Name
Example:
The hoses and some fittings required for the hydraulic installation are NOT
included in this kit. The parts needed for complete installation of the UC4.5
Sprayer Height Control system are:
 Fittings (*F03) to interface the VG hoses to the 6MB ports on the NORAC
valve block (4 are required for double-acting hydraulics and 2 are required for
single-acting hydraulics).
 2 fittings (*F04) and 2 hoses (*H01) to interface the pressure and tank lines to
the 6MB P and T ports on the NORAC valve block.
 2 tee fittings (*F05) may be needed to tee the pressure and tank hoses if the
sprayer has steering.
Do not use high speed power tools/drills when installing hardware.
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.