Cisco Cisco Unified Wireless IP Phone 7925G - Manual (Page 76)

68 OL-16132-01
Tips
• Only one Bluetooth device can be connected to the phone at one time.
• A Bluetooth device must remain within 10 m of the phone to keep the connection.
• A Bluetooth device will be disconnected if the phone is powered off or if Bluetooth is disabled on
the phone.
• If a device previously paired with the phone is used to connect to another Bluetooth device, you
must first unpair it, then pair it again with the phone.
• If a Bluetooth headset becomes disconnected (being out-of-range of the phone or the phone battery
loses power), it should automatically reconnect when it is in-range again or the battery is
recharged. If it does not reconnect, you can tap on the Bluetooth headset once to reestablish the
connection.
• If a Bluetooth headset is in power-save mode and becomes disconnected from the phone, you may
need to tap the headset once to “wake” it to reestablish a connection.
Unpair a Bluetooth headset
from the phone 1. Choose > Phone Settings > Bluetooth > Device List.
2. Select a headset from the list, press Options > Unpair.
3. Press Yes to confirm.
The headset disconnects from the phone and is removed from the
Device List.
Disconnect a Bluetooth
headset from the phone 1. Choose > Phone Settings > Bluetooth > Device List.
2. Select a headset from the list, press Options > Disconn.
3. Press Yes to confirm.
The headset disconnects from the phone but remains on the Device
List (without a checkmark next to the device name).
Switch from a Bluetooth
headset to the speaker or
handset during a call 1. Press and hold . The Select Audio Path menu appears.
2. Select Speaker or Handset.
3. To switch modes again, press and hold , and select another
audio mode.
Note After the call, the phone remains in the last audio mode it used
during the call.
Switch to the Bluetooth
headset during a call from
the speaker or handset 1. Press and hold . The Select Audio Path menu appears.
2. Select Bluetooth.
Note If a wired headset is connected to the phone, the Bluetooth option
will not be available for selection even if the Bluetooth connected
icon is displayed. To use the Bluetooth headset, you must first
unplug the wired headset.