Cisco Cisco Unified Wireless IP Phone 7925G - Manual (Page 43)

Basic Call Handling
Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 35
• If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.
• If you hear a beep tone from your phone, you might be out of range of the wireless network. Move
to a location where you can see a strong signal icon
on the phone if you wish to use your
phone.
Placing a Call—Additional Options
You can place calls using special features and services that might be available on your phone. See your
system administrator for more information about these additional options.
If you want to... Then...
For more information,
see...
Speed dial a contact number
in your local phone book Do one of the following:
• Press and hold a speed-dial hot key for
about two seconds.
Note If dialing a two-digit number, enter the
first digit, then press and hold the
second digit for about two seconds.
• Choose (Directory)> Speed
Dials, highlight a speed dial, and
press .
Using the Phone Book
on Your Phone,
page 82
Speed Dialing, page 52
Speed dial a phone number
(for a Line View speed-dial
number set up on the web) 1. Press .
2. Scroll to a speed dial .
3. Press or to make the call.
Speed Dialing, page 52
Place a call while another
call is active (using a
different line) 1. Press Hold.
2. Press .
3. Scroll to another line and press .
4. Dial a number.
5. Press to make the call.
Using Hold and
Resume, page 39
Place the call on a
secondary line 1. Press and scroll to another line.
2. Dial a number.
3. Press to make the call.
Switching Between
Multiple Calls, page 41