Cisco Cisco Unified Wireless IP Phone 7925G - Manual (Page 49)

Basic Call Handling
Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0 41
Switching Between Multiple Calls
You can switch between multiple calls on one or more lines. If the call that you want to switch to is
not automatically highlighted on the phone screen, scroll to it.
Tips
• The phone can have up to six lines, but the phone screen displays only one line. To see other lines,
you must press
(Line View).
• The phone can have multiple calls per line, but no more than 24 calls per phone.
Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to... Then...
Switch between
connected calls on one
line 1. Make sure the call that you want to switch to is highlighted.
2. Press Resume.
Any active call is placed on hold and the selected call is resumed.
Switch between
connected calls on
different lines 1. Press to change to another line.
2. If a single call is holding on the line, the call automatically resumes. If
another call is holding, scroll to highlight the appropriate call and
press Resume.
Switch from a
connected call to
answer a ringing call
(using the handset) Press , or if the call is ringing on a different line, press to
switch to the other line and press .
Any active call is placed on hold.
Switch from a
connected call to
answer a ringing call
(using the Bluetooth
wireless headset) You can place the first call on hold or end the call when you answer the
ringing call.
For more information, see your Bluetooth wireless headset documentation.