MOOER BEM Box User Manual

Page 15

Change Setting

Press [VALUE] knob to change effect/parameter type ahead, hold

and rotate [VALUE] knob to change effect/parameter type ahead

(clockwise) or backwards (anticlockwise), rotate [VALUE] knob to

set a new value of the effect type or parameter. As long as the

selected item’s value changes, a dot (.) will appear in the bottom

right of the display. This indicates that a setting has been changed

from the currently stored value.

Bypass an Effect Module

When adjusting an effect in EDIT mode, press [MODULE

BYPASS] / [PATCH +] footswitch to bypass this effect module, the

indication will appears on the display and the module will be

turned off. Pressing [MODULE BYPASS] / [PATCH +] switches

once more will return the setting to the previous condition.

Adjusting the Patch Level

Set the Module Selector to [PATCH LEVEL], rotate [VALUE] knob

to adjust the volume of a patch, LED display will show the current

level.

The range of patch level is ~ .

Patch Editing

Note: If you return to [PLAY] module and select another patch, the

changes you have made in edit mode will be lost unless you store the

patch ﬁrst.