Microtel D51T v.1.0 User Manual
Page 22

MICROTEL
D51T
20
Example- Command:
*00
Response:
Channel one normally closed digital input in alarm.
Temperature is seven eight degrees. The local output is
open.
Controlling the local output relay
D51T has a set of output contacts that may be controlled from a touch-tone phone. These
contacts may be used to turn ON or OFF external equipment, or as a signal input to
another device. Simply enter the following command during a phone call to or from the
dialer, via either the phone or cellular connection.
NOTE: de-energized state is open.
*06
Review local output configuration
**06 0/1/2
Configure/Control local output
Example- Command:
**060
Response:
The local output is closed.
Example- Command:
**061
Response:
The local output is open.
Example- Command:
**062
Response:
The local output is fault status