Microtel D51T v.1.0 - Manual (Page 20)

MICROTEL D51T
18
Response: The high temperature alarm point is nine zero degrees.
Example- Command: ** 1 5 90
Response: Error!
(Error! is spoken by the dialer because Channel 1, a digital input, does not have an
alarm set point ).
Telephone Numbers
As described in the theory of operation in Chapter 1, D51T can store up to four (4) phone
numbers in the System Telephone Directory. This section explains how to program the
dialer’s telephone numbers and shows how to customize the numbers for certain call-out
situations.
Use the following command to enter each telephone number into D51T:
*8n
Review Telephone n (n=1 to 4)
**8np** Program Telephone n (n=1 to 4)
p = telephone number of up to 30 digits with escape codes for one of 4 (four) telephone
numbers. The telephone data is terminated with ‘**’ (two asterisks).
Example- Command:
**812760571**
Response: Telephone number one is two seven six zero five seven one
Example- Command:
**852432400**
Response: Telephone number five is two four three two four zero zero
These phone numbers may be customized to use the Call Progress features of the dialer.
Refer to the Advanced Topics chapter for a full discussion about using these powerful
features of the D51T Dialer.
Operations