Microtel D51T v.1.0 User Manual
Page 11
MICROTEL
D51T
9
Step Two - Telephone Connections
include the external phone line for call-outs
and the optional local telephone connection for local programming and monitoring.
CAUTION: This equipment cannot report an alarm when other equipment (telephone,
answering system, computer modem, etc.) connected to the same phone line is in use.
1. Connect the dialer’s LINE jack to the EQUIPMENT Phone jack of the MicroMax
Surge Suppressor using the cable supplied with your dialer.
2. Connect the Telephone LINE jack on the MicroMax Surge Suppressor to the RJ11
jack of your outside line using the cable supplied with the MicroMax Surge
Suppressor.
3. Connect a local telephone (optional) to the dialer’s PHONE jack.
NOTE: Telephone line transients and surges can damage the dialer or disrupt its
operation. We recommend use of the MicroMax Surge Suppressor for normal operations.
Step Three - Connect External Input/Output to the Dialer
Each Fault input
has a corresponding terminal (1 - 4), and there are two COM terminals. See Figure 3