MF Digital Ripstation v4.4.15.0 - Manual (Page 30)

Ripstation v4.4 Main User Guide 100-5-01-000
Ripstation v4.4 – User Manual Page 30 of 34
3.5.3 Operations during Batch Rip
3.5.3.1 Operations with Robotic Autoloader

At the start of a batch process, all selected drives will eject. Place CDs in the
drives and click ‘close all drives’. The batch process will now progress.

As each CD is completed, it will be ejected. Replace with another when ready.
At the end of the batch the screen in figure 3.18 will be presented.
Figure 3.18 – Batch Complete Dialog
When Ripstation can find no more discs to load, the user is now presented with 3
options:

Cancel the batch (No more discs to rip)
This will end the batch after any discs still being ripped have finished ripping. All
drives will now be closed.

Try again (There are still discs to rip)
This will instruct the bot to retry the last attempted spindle. The bot will not retry
a spindle which has been used as an output spindle.

Continue from beginning (New discs have been loaded)
This continues the current batch, and will restart from the first spindle.
3.5.3.2 Operations without Robotic Autoloader

Before clicking the Start Batch button, load the input spindle with CDs. At the
start of the batch process, each drive on the MFD series will open and will be
checked for the presence of a CD – in the case of none found, the drive will be
loaded with a CD from the input spindle, closed and read. This step is followed
for each CD in turn.
When each CD is completed it is collected and either placed on the ‘Accept’ spindle as a
good CD or the small ‘Reject’ pile as a failed CD.