MF Digital Ripstation v4.4.15.0 - Manual (Page 25)

Ripstation v4.4 Main User Guide 100-5-01-000
Ripstation v4.4 – User Manual Page 25 of 34

Calculate Replay Gain – This will switch on the option to calculate the replay
gain value and embed it in the file.

Rip all tracks to one file – This will rip all tracks on the disc to a single file and
will also write out a cue file for the ripped track.
NOTE: These options may be selected or unselected.

3.5 Starting a New Batch
3.5.1 Batch Setup
In the main Ripstation screen, click the ‘New Batch’ button and the Start a New
Batch dialog box shown in figure 3.14 appears.
Figure 3.14– Batch Properties Dialog Box

Source Device – select the model of robotic device you are using, or IDE/USB
Drives to use internal or external CD/DVD Rom drives with no robotics.

Edit – additional edits can be made such as COM port, Shake mode (on/off) and
for MFD 7602/7604 devices, the option to select which side the drives are on.
Shake mode was introduced to address sticking discs being double loaded into