Maxim Integrated MAX15301 PMBus Command Set - Manual (Page 32)

MAX15301 PMBus Command Set User’s Guide
Rev 1 Page 32 of 53
READ_FREQUENCY
Reference: Standard Command Lockable: N/A
Command Code: 0x95 Format: Linear
Data Bytes: 2 Units: kHz
Transfer: Read Word Factory Value: N/A
Description/Notes: See Section 18.10 of the PMBus Specification Part II.
The READ_FREQUENCY command returns the actual switching frequency in kilohertz.
The desired switching frequency is set using the FREQUENCY_SWITCH command.
PMB_VALUES
Reference: Maxim Specific Lockable: Yes
Command Code: 0xF5 Format: See Description
Data Bytes: 215 Units: See Description
Transfer: Read/Write Block Factory Value: See Description
Description/Notes: This command returns most PMBus command values from the device for ease of recording the device
configuration. The command data returned is as follows: